pressure pad
英 [ˈpreʃə(r) pæd]
美 [ˈpreʃər pæd]
网络 承压垫; 压垫; 压力垫开关; 压板
双语例句
- All cars are filled with hundreds of sensors, measuring everything from tire pressure to brake pad condition.
所有汽车里面都装满了数以百计的传感器，它们测量汽车内从轮胎压力到刹车片状态的一切情况。 - This can be done through pressure by the fingers or hand, but if readily available use a sterile dressing with an adequate pad, and bandage firmly in position.
这通常可以通过手指或手来施加压力。但如果有现成的，可以用一个适当的消过毒的垫子，并且在恰当的位置牢固地绑上绷带。 - Cassette tape: A plastic cartridge which contains 1/ 4 inch or narrower tape, takeup reels, and a read/ record head pressure pad.
盒带：一个塑胶盒，装有1/4时或更窄的胶带，收带卷轴和写读头压力垫。 - A pressure sensitive pad is plugged into the computer.
它是一种插入到计算机中的压力感应板。 - A simple test that compares blood pressure in the arms and legs can be used to screen people for PAD.
筛查PAD方法很简便，就是对比分析受检者上下肢动脉血压。 - When external attachments made of carbon steel is to be welded to stainless steel pressure parts, stainless steel pad plate is required on pressure parts.
在将外部碳钢附件焊接到不锈钢压力部件上时，需在压力部件上加不锈钢垫板。 - Is that pressure pad on the case.
柜子上是压力板吗？ - A pressure pad is mounted in the camera on the opposite side of the film and positioned in close proximity to the film.
照相机中胶片的反面装有一个压力垫紧靠胶片配置。 - The analysis shows that inlet pressure has a significant influence on the static and dynamic characteristics of tilting-pad journal bearings.
结果显示：进油压力对可倾瓦径向滑动轴承的静动特性具有重要影响。 - Inlet Pressure Effects on the Thermo hydrodynamic Performance of a Tilting Pad Thrust Bearing
可倾瓦推力轴承中进口压力对热动力润滑性能的影响 - The velocity seems to be raised following the radial direction and the time; The pressure is varying with the position in the radial direction and the increase in pad roll velocity is conducive to the remove rate of CMP process.
速度场呈现了沿半径方向逐渐增大，随时间增大到逐渐稳定的规律。计算结果表明：抛光中的压力分布是沿半径方向变化的且抛光垫转速的增加将有助于提高抛光的切除速率。 - The negligible problems of local pressure in the supporting position of beams in upper structure are proposed for brick masonry structure design. The problems are pad setting problems.
提出了在砖混结构设计中，其上部结构梁端支承处砌体局部受压常被忽视的问题，即梁端、梁下垫块的设置问题。 - For the certain drum brake, the contact pressure distribution between brake pad and the drum was simulated by using software ANSYS.
采用有限元分析软件ANSYS对鼓式制动器摩擦衬片与制动鼓之间的接触应力进行了有限元仿真。 - This paper presents the reformation of hydrostatic lift system, that oil is forced under the high pressure into two recesses on the sliding surface of the pad through a hole, and deduces it's calculation method.
提出了高压油顶起装置的一种改进，即高压油通过一个孔注入推力瓦面上的两个油室内，同时推导了相应的计算方法。 - On the basis of the constructing wrinkling models, the wrinkling critical tangent pressure formulas for a simple circular cup drawing without the pad are deduced by the compression plasticity unstability critical load formula.
在建立皱由模型的基础上，根据压缩塑性失稳临界载荷公式，导出圆筒形件不用压迫拉深时的皱曲临界切向压应力表达式。 - The pressure is varying with the position in the radial direction and the increase in pad roll velocity is conducive to the remove rate of CMP process.
计算结果表明：抛光中的压力分布是沿半径方向变化的且抛光垫转速的增加将有助于提高抛光的切除速率。 - Affects of Rotor Magnetic Field Center Deflection and Rotor Pole Center Suspending Difference to the Pressure on Thrust Pad in Large Synchronous Machines
大型同步电动机转子磁场中心安装偏差及转子磁极中心挂装高程差对推力瓦受力的影响 - In order to realize full automation of chromatographic analysis, the gradient elution system with two high pressure pumps, fast-scanning photodiode array detector ( PAD) and autosampler have been controlled as a system Ly IBM PC/ XT microcomputer.
该仪器把梯度洗脱装置、光二极管列阵扫描检测器及自动进样器作为一个系统用一台微机进行控制、数据采集和处理，从而实现液相色谱分析的全盘自动化。 - The treatment method of primary drawing parameter without uniformity for asymmetric box was introduced, the technology steps to balance asymmetric force of pressure pad were put forward, and compound die structure of blanking-drawing-shaping for lock-shell was designed.
介绍不对称盒形件一次拉伸参数不一致时的处理方法，提出了平衡不对称压边力的工艺措施。设计了锁壳的落料拉伸成形的复合模具。 - Examination Method for Pressure Elastic Modeling Quantity of Crown-type Elastomeric Pad Bearing of Highway Bridge
公路桥梁球冠橡胶支座抗压弹性模量检测方法探索 - The rock mechanics parameters, such as Yangs modulus and Poisson's ratio, are determined on the basis of surface fracturing treatment pressure and instantaneous shut-in pressure during PAD stage.
应用常规的地面压裂施工压力资料和前置液阶段的瞬时停泵压力测试等资料，初步探讨了求取储层原位岩石力学参数的新方法。 - Inlet Pressure Effects on the Static and Dynamic Characteristics of Tilting-pad Journal Bearing
进油压力对可倾瓦径向滑动轴承静动特性的影响 - When compressed air passes through the clearance between hydrostatic pad and coating rotor with high speed, the pressure acts on the working surface of hydrostatic pad was much smaller than inlet air pressure, and this assured that hydrostatic pad has the merit of small displacement.
当密封流体高速通过静压靴间隙时，作用于静压靴工作面上的压力并不大，因此，保证了工作状态下静压靴的小变形优点。 - The measuring results make clear that the changing trends of friction coefficient of the thrust bearing, water film thickness, pressure distribution, and temperature distribution of the thrust pad are consistent with the theoretical results, which also have better attested the conclusion of the theoretical analysis.
试验测试结果表明：摩擦系数变化趋势，水膜厚度、压力分布，以及推力瓦温度分布状况等，与理论计算结果基本一致，较好地验证了理论分析所得到的结论。